The Push-Lock® Anchor Bolt fitting is an exposed, swageless, non-tensioning, face-of-the-surface-mounted fitting that is suitable for use on level runs only, and is available for 1/8” and 3/16” diameter 1×19 stainless steel cable.
The Push-Lock® Anchor Bolt must be used with a tensioning fitting on the opposite end of the run. A concrete anchor is driven into a pre-drilled hole in the concrete surface. The anchor bolt portion of the fitting is threaded into the concrete anchor. The cable attaches to the fitting via our Push-Lock® locking wedge system which requires no special tools. The Red Head® Concrete Anchor is available for purchase at many building supply retailers and distributors throughout the country.
|Cable Diameter||Part No.|