The Invisiware® Stud is a concealed, swaged, non-tensioning, inside-the-post-mounting fitting that is suitable for use on level or pitched runs and is available for 1/8”, 3/16”, 1/4”, 5/16”, and 3/8” diameter 1×19 stainless steel cable.
The Invisiware® Stud can be used as a non-tensioning end in level or pitched applications. It is swaged onto one end of the cable and threaded into a drilled and tapped hole in the face of the post (1/4” wall thickness minimum). This fitting would typically be paired with an Invisiware® Receiver and Stud tensioning fitting on the opposite end. This method of using an Invisiware® Stud as a non-tensioning end is restricted to interior applications.
Specifications
Type 316 Stainless Steel – Moly Coated
| Cable Diameter | Part No. | Thread | “L” | “D” Dia. After Swaged |
|---|---|---|---|---|
| 1/8” | S-4 | 5/16-24 | 1.180″ | .250″ |
| 3/16” | S-6 | 5/16-24 | 1.140″ | .250″ |
| 1/4” | S-8 | 7/16-20 | 1.380″ | .375″ |
| 5/16” | S-10 | 9/16-18 | 1.330″ | .500″ |
| 3/8” | S-12 | 9/16-18 | 1.310″ | .500″ |
