Cable grommets are offered for popular cable diameters of 1/8”, 3/16” and 1/4”. They help prevent rust in exterior applications or elsewhere where moisture is a factor, by providing a barrier between the cable and the painted or powder-coated surface through which the cable is drawn when being installed. They help prevent noise in interior applications by dampening vibration in the cables. Ultra-tec® cable grommets are installed (after the paint or powder coating is applied) into holes in intermediate posts, cable braces and, in the case of the Invisiware® Radius Ferrule, Push-Lock®, and Pull-Lock® fittings into the end post holes through which the cable exits. They are offered in black UV resistant Delrin®.

Specifications

 

Intermediate Post Material

(Not slotted for stairway)

Intermediate Post Material Slotted for Stairway Pitch Up to 36°
Cable Dia.

Schedule 40

1-1/4″

1-1/2″

2″ Pipe

Sq. or Rect. Tube

with .120″ Wall

1/4″ Cable Brace

or Sq. ot Rect. 

Tube with .250″ Wall

1/2″ Flat Bar

Schedule 40

1-1/4″

1-1/2″

2″ Pipe

Sq. or Rect. Tube

with .120″ Wall

1/4″ Cable Brace

or Sq. ot Rect. 

Tube with .250″ Wall

1/8”, 3/16”G-C6-1G-C6-2G-C6-4G-C6-.500GI-C6-1GI-C6-2GI-C6-4
1/4”G-C8-1G-C8-2G-C8-4N/AGI-C8-1GI-C8-2GI-C8-4

Order cable grommets by diameter of cable an post through which the cable will be drawn. 

Cable grommets are available in lots of 100 each. 

 End Post Material Using Radius Ferrule, Push-Lock® or Pull-Lock® Fittings
Cable Diameter

Schedule 80

1-1/4″*, 1-1/2″ or 2″ Pipe

Sq. or Rect. Tube

with .250″ Wall*

1/8”, 3/16”G-C6-3G-C6-4
1/8”, 3/16”

G-C8-3

G-C8-4

*Cable grommets not required for Push- or Pull-Lock® applications where fittings extends through both walls of post frame. 

Find What You're Looking For?

If you’ve found what you’re looking for, then it’s time to find a dealer to make your purchase.

SITESEARCH