FOLLOW US

The Adjust-A-Body® with Concrete Anchor Bolt is an exposed, swaged, tensioning, face-of-the-surface-mounted fitting that is recommended for level runs terminating at a concrete surface only. This fitting is available for 1/8”, 3/16”, and 1/4” diameter 1×19 stainless steel cable.


The Adjust-A-Body® with Concrete Anchor Bolt can be used with any fitting on the opposite end of the run. A concrete anchor is driven into a pre-drilled hole in the concrete surface. The short thread of the anchor bolt portion of the fitting is threaded into the concrete anchor. The cable is retained within the body portion of the fitting by a ferrule swaged onto the end of the cable. The lock nut is installed all the way onto the exposed machine thread of the anchor bolt, followed by the body, which is secured onto the anchor bolt until effectively creating tension on the cable. Once sufficient tension is achieved, the lock nut is secured against the end of the body to prevent the fitting from loosening.


Use of this fitting requires that an appropriately sized ferrule is swaged onto the cable. Ferrule sold separately, see information on page 8. The Red Head® Concrete Anchor is available for purchase at many building supply retailers and distributors throughout the country.

Specifications

Cable Diameter Tube Length Part No.
1/8”, 3/16” 3/4” CS-TUBE
1/8”, 3/16” 3/4” CS-TUBE
1/8”, 3/16” 3/4” CS-TUBE
1/8”, 3/16” 3/4” CS-TUBE
1/8”, 3/16” 3/4” CS-TUBE
Adjust-A-Body® with Concrete Anchor Bolt
Cable Diameter Part No. Use with Ferrule No. “S” “T” Thread “Ls” “Lt” “Loq” “Ln” “Lr” “D”

Use with “Red Head” Brand Concrete Anchor

Carbon Steel

Use with “Red Head” Brand Concrete Anchor

Stainless

1/8” A-JAB6 F-4 3/8-16 5/16-24 L.H. .500″ 2.313″ 3.188″ .375″ 2.75″ .490″ RM-38 SRM-38
3/16” A-JAB6 F-6
1/4” A-JAB8 F-8 1/2-13 7/16-20 L.H. 1.125″ 2.500″ 3.938″ .500″ 3.00″ .617″ RM-12 SRM-12

The Adjust-A-Body® with Concrete Anchor Bolt is an exposed, swaged, tensioning, face-of-the-surface-mounted fitting that is recommended for level runs terminating at a concrete surface only. This fitting is available for 1/8”, 3/16”, and 1/4” diameter 1×19 stainless steel cable.


The Adjust-A-Body® with Concrete Anchor Bolt can be used with any fitting on the opposite end of the run. A concrete anchor is driven into a pre-drilled hole in the concrete surface. The short thread of the anchor bolt portion of the fitting is threaded into the concrete anchor. The cable is retained within the body portion of the fitting by a ferrule swaged onto the end of the cable. The lock nut is installed all the way onto the exposed machine thread of the anchor bolt, followed by the body, which is secured onto the anchor bolt until effectively creating tension on the cable. Once sufficient tension is achieved, the lock nut is secured against the end of the body to prevent the fitting from loosening.


Use of this fitting requires that an appropriately sized ferrule is swaged onto the cable. Ferrule sold separately, see information on page 8. The Red Head® Concrete Anchor is available for purchase at many building supply retailers and distributors throughout the country.

Specifications

Cable Diameter Tube Length Part No.
1/8”, 3/16” 3/4” CS-TUBE
1/8”, 3/16” 3/4” CS-TUBE
1/8”, 3/16” 3/4” CS-TUBE
1/8”, 3/16” 3/4” CS-TUBE
1/8”, 3/16” 3/4” CS-TUBE
Adjust-A-Body® with Concrete Anchor Bolt
Cable Diameter Part No. Use with Ferrule No. “S” “T” Thread “Ls” “Lt” “Loq” “Ln” “Lr” “D”

Use with “Red Head” Brand Concrete Anchor

Carbon Steel

Use with “Red Head” Brand Concrete Anchor

Stainless

1/8” A-JAB6 F-4 3/8-16 5/16-24 L.H. .500″ 2.313″ 3.188″ .375″ 2.75″ .490″ RM-38 SRM-38
3/16” A-JAB6 F-6
1/4” A-JAB8 F-8 1/2-13 7/16-20 L.H. 1.125″ 2.500″ 3.938″ .500″ 3.00″ .617″ RM-12 SRM-12

RELATED RESOURCES

Find What You're Looking For?

If you’ve found what you’re looking for, then it’s time to find a dealer to make your purchase.

SITESEARCH